Model NO.: TD42 Origin: China(Mainland) Trademark: GOOLE, OEM HS Code: 8481804090 TD42 Thermodynamic
Steam Trap Brief Introduction.
TD42 Steam Trap is a kind of thermodynamic steam trap which is mainly used for the environment with low condensate back pressure and low capacity requirement, similar to Spirax Sarco Design.
Structural Characteristic.
1.Assembled with steam or air heat preservation mechanism and unaffected by the environmental humidity;
with operation frequency decreased, its service life prolonged.
2.Provided with filter screen and drainage
valve .
3.The valve runs flexibly and reliably with large displacement.
Working Principle.
By taking advantage of themodynamics characteristics,secondary evaporation will arise when the condensate water is discharged to the lower pressure zone and meanwhile when the viscosity and density of steam differ,the
Drain Valve will open of close.
Main Function.
The valve is applicable in the steam pipeline and equipment to avoid steam leakage and eliminate steam leakage in order to conserve energy and keep from water hammer and other faults.
Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate near the saturation temperature.
Field of Application.
Product Name: TD42 thermodynamic steam trap.
Pressure Rating: 1.6- 6.4 Mpa.
Nominal Diameter: DN15-50 mm.
Body Material: Steel WCB,Stainless Steel.
Standard flanges: DIN, ANSI, JIS.
Standard Screwed:NPT,BSP.
Main Technical Parameters and Indexes of Performance.
| Nominal pressure | PN63 |
| Maximun design pressure(PMA) | 63bar g |
| Maximun design temperature(TMA) | 400 |
| Minimun design temperature(TMI) | -10 |
| Maximun upstream pressure for saturated steam service(PMO) | 42bar g |
| Maximun operating temperature(TMO) | 400 |
| Minimun operating temperature(TMIO) | 0 |
| Minimun differential pressure( PMiX ) | 0.25bar |
| Maximum cold hydraulic test pressure | 95bar g |
Material of Main Component.
| Name of component | Material of component |
| Valve body, valve cover | WCB |
| Others | stainless steel |
Main External Dimensions.
| Product model | DN
(mm) | Connection | Dimension |
| L | H1 | H2 |
| TD42 | 15 | Internal thread | 80 | 47 | 54 |
| 20 | Internal thread | 90 | 52 | 59 |
| 25 | Internal thread | 95 | 59 | 62 |
| 32 | Internal thread | 105 | 70.5 | 89.5 |
| 40 | Internal thread | 110 | 70.5 | 89.5 |
| 50 | Internal thread | 120 | 70.5 | 104.5 |
| TD42 | 15 | Socket welded | 80 | 47 | 54 |
| 20 | Socket welded | 90 | 52 | 59 |
| 25 | Socket welded | 95 | 59 | 62 |
| 32 | Socket welded | 105 | 70.5 | 89.5 |
| 40 | Socket welded | 110 | 70.5 | 89.5 |
| 50 | Socket welded | 120 | 70.5 | 104.5 |
Contact us if you need more details on China Td42 Thermodynamic Disc Type Steam Trap. We are ready to answer your questions on packaging, logistics, certification or any other aspects about China Steam Trap、China Cast Steel Steam Trap. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Steam Trap > NP Steam Trap
